Double Bolted Tube Clamp Top Applications Explained

 Due to the abundance of available pipe supports, it is easy for the value of the double bolted tube clamp to be lost in the mix. But these simple clamps might be just what you need to provide additional support for your pipes, enhance pipe performance, and protect against corrosion. Even if the vast majority of specialists in a wide variety of fields are familiar with every aspect of this device, some of them are not. Therefore, for them to gain a better understanding of the clamp, below is the guidance that they will need to follow:

What exactly is the double bolted tube clamp, and how does it work?

The design of the double bolted tube clamp may be simplified considerably, even though it is available in a wide variety of forms and dimensions. Two circular sections designed to fit snugly around a pipe are often included in these pipe supports. They are joined together by means of bolts, as you could have predicted. Clamps are useful for holding things in place, and often one end is attached to an anchor or beam. First, you'll place the pipe within the clamp's open, stationary half. Next, you'll close the clamp by clamping its second, bent half around the pipe's rim.

The whole diameter of the pipe may be harnessed and fixed to your anchored component by tightening the bolts. Do you have any questions on how to implement bolt clamps in your system? The following are four situations in which having them might prove useful:

The most typical uses for the double bolted tube clamp

1. Using a double bolted tube clamp is one way to lessen the chances of corrosion

Pipe corrosion may occur if your pipes are rubbing against hard surfaces, so try to avoid situations in which this happens. The outside surface of pipes can rip and split apart when they are scraped over beams or other things. Iron may be easily corroded if even a little hole or nick on its surface is present. Additionally, galvanic corrosion is a potential threat to pipes that rest directly on metal beams or other exposed metal surfaces. When two types of metal that aren't very comparable come into contact with one another under the correct conditions, they may kick off an electrochemical process that corrodes the metal.

Pipes will be protected from all kinds of corrosion if they have a double bolted tube clamp that was constructed appropriately. In addition to protecting pipes from damage caused by corrosive metals, they may also protect them from vibrations, minimize friction, and elevate pipes off surfaces.

2. When it is Necessary to Exercise Control over the Movement of Pipes

In essence, your pipes' movement may be controlled by the double bolted tube clamp. These prevent pipes from rattling about and potentially damaging other pipes or nearby items. Additionally, they prevent pipes from rattling, bouncing, and rubbing against surrounding objects.

It's always possible for pipes to be in motion, even when they seem to be still. Pipes are susceptible to thermal expansion due to the constant movement of liquids through them. Pipes have a risk of sliding, rubbing against their surroundings, and wearing down as a result of this heat transmission. You may prevent wear, ruptures, and scratches on your pipes by using bolt clamps to hold them. This keeps them from moving about as much.

3. Circumstances in Which You Should Attempt to Avoid Welding

As an alternative to employing the double bolted tube clamp, you might attach a pipe to a location by either welding the pipe itself or making use of pipe supports that are more long-lasting, non-adjustable, or closed. However, there are a number of significant drawbacks associated with supports that cannot be adjusted, including the following:

• Under the covering of insulation, they are vulnerable to rust.
• It is tough to enlarge them or make changes to them if you need to tweak the pipe runs.
• When something is welded, it usually means that it needs more examination and upkeep.

Instead of using permanent or fixed supports, you might find that working with a double bolt clamp tube is far simpler. You can make adjustments to them after they have been installed since they are adjustable. Pipes that are drooping may have their suspension adjusted by tightening or releasing the supports holding them up. Likewise, you won't have to replace large portions of pipe to access the area under the insulation for cleaning or to install new supports.

4. Securing the Hanging Pipes When You Want to Do So

There are many different types of pipe runs, and not all of them can be readily supported by a horizontal beam. A double bolted tube clamp may be a real lifesaver if you ever find yourself in a situation where you need to secure pipes that are dangling. Hanger attachments like threaded rods work well with them because of how simple they are to set up and modify. They are also able to accommodate pipes of varying diameters. Here are several examples:

• Heavy-duty clamp for pipe
• Medium pipe clamp
• Double-bolt clevis clamp

What's the bottom line?

Bolt clamps are straightforward devices that prevent your hanging pipes from collapsing or striking other objects in the environment. This is accomplished regardless of the size or configuration of your piping system. It's important to keep in mind that not all double bolted tube clamps are the same. 

When it comes to the construction of these clamps, you need to use materials of a very high grade. In addition, make it a point to check that the clamps have not developed any rust or sustained any damage over time. Choose a well-reputed supplier when you want to buy a high-quality double-bolted tube clamp.